PREMIUM Hard wax oil

30,0085,00

PREMIUM line product, enriched with high quality Carnauba wax.

Oil and wax effectively increases the abrasion resistance of the oiled surface, repels water and dirt.

Highlights clear wood fiber.

Creates a feeling of coziness in the room.

No stains are formed when household liquids get on the surface.

The oiled surface is easily renewable. Hard wax oil is compatible with other Paint Eco products.

Clear
SKU: p-evs

Application: Interior: wooden floors, ladders and furniture.

 

Drying time: ±18 hours at temperature +20 (± 2) ̊C.

Lower temperatures, humid air and wood extend the drying time.  

 

Surface preparation:

  • the wood must be clean and dry;
  • the surface must be completely free of residues of previously applied chemical paints;
  • we recommend to do the work at +10°C – +25°C.

 

Consumption:

  • Pine/ spruce ~15 – 18 m2/L
  • Hardwood (oak/ ash tree) ~35 -40 m2/L

These measurements are indicative. Your consumption may differ from our instructions.

 

Workflow:

Surface lubrication with colourless oil with hard wax:

  • apply with a brush, velour roller or lubrication machine;
  • divide into sectors the surface to be lubricated;
  • for a high quality coating, the oil should be applied in 1-2 thin layers, taking into account the absorbency of the wood;
  • on the first layer apply the oil as thin and evenly as possible;
  • after the application, allow the product to soak for 15-20 minutes, any excess oil that has not soaked into the surface should be wiped thoroughly with paper towels, a lint-free cloth or a polishing disc.

After removing the oil residue, make sure that there is no excess oil on the floor surface and the surface feels dry to the touch. The oil must not be allowed to dry on the wooden surface, as it leaves glossy stains on the floor.

  • before the second layer is applied wait at least 18 hours.

 

If necessary, apply the second layer. The course of work is identical to the first layer.

 

When performing surface (floor) tinting:

  • for the first layer, we recommend using Paint Eco stain or Whitened boiled linseed oil, which prevents yellowing of the surface.
  • after the application, allow the product to soak for 15-20 minutes, any excess oil that has not soaked into the surface should be wiped thoroughly with paper towels, a lint-free cloth or a polishing disc.
  • After removing the oil residue, make sure that there is no excess oil on the floor surface and the surface feels dry to the touch. The oil must not be allowed to dry on the wooden surface, as it leaves glossy stains on the floor.
  • before the second layer is applied wait at least 24 hours;
  • for the second layer, use oil with hard wax. Apply as thinly and evenly as possible. Any excess oil that has not soaked into the surface should be wiped thoroughly with paper towels, a lint-free cloth or a polishing disc.

 

After removing the oil residue, make sure that there is no excess oil on the floor surface and the surface feels dry to the touch. The oil must not be allowed to dry on the wooden surface, as it leaves glossy stains on the floor.

 

Tool cleaning:

We recommend to clean it with natural turpentine or warm water and soap.

Attention! During the first week it is advisable not to wash the floor. Do not put floor coverings and furniture on the floor.

 

Storage:

Up to 3 years and longer if can is kept dry, in a room temperature and closed tightly.

Do not expose to direct sunlight. Do not store it together with food.

 

WARNING!

Discs and polishing cloths used during floor lubrication must be placed in a container with water after the use to prevent their self-ignition! Keep out of reach of children!

 

--> --> -->
Shopping Cart
There are no products in the cart!
Continue Shopping